AISI 5132/ 1.7033 / DIN 34Cr4
- Grade:
Click To Email Seller
Specification, Chemical & Mechanical Performance
We can produce 1.7033, DIN 34Cr4, AISI 5132 stainless steel round rods, 1.7033, DIN 34Cr4, AISI 5132 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With Bozhong production experience, strict control 1.7033, DIN 34Cr4, AISI 5132 chemical composition and 1.7033, DIN 34Cr4, AISI 5132 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.
Production specification
Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.
Designation by Standards
Brand Name | Ravne No. | Mat. No. | DIN | EN | AISI |
VC130 | 710 | 1.7033 | 34Cr4 | 34Cr4 | 5132 |
Chemical Composition (in weight %)
C | Si | Mn | Cr | Mo | Ni | V | W | Others |
0.34 | max. 0.40 | 0.75 | 1.05 | - | - | - | - | - |
Description
Structural steel.
Applications
Screws, dynamically stressed machine parts, etc.
Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210
Density [g/cm3]: 7.85
Thermal conductivity [W/m.K]: 43.1
Electric resistivity [Ohm mm2/m]: 0.19
Specific heat capacity[J/g.K]: 0.46
Coefficient of Linear Thermal Expansion 10-6 oC-1
20-100oC | 20-200oC | 20-400oC |
11.0 | 12.5 | 13.5 |
Soft Annealing
Heat to 680-720oC, cool slowly. This will produce a maximum Brinell hardness of 223.
Normalizing
Temperature: 850-890oC.
Hardening
Harden from a temperature of 830-870oC followed by water or oil quenching.
Tempering
Tempering temperature: 540-680oC.
Mechanical Properties in Hardening and Tempering Condition
Diameter (mm) | 0.2 % proof stress (N/mm2) | Tensile strength (N/mm2) | Elongation (%) | Reduction of area (%) | Notch impact energy (ISO-V) (J) |
up to 16 | 700 | 900-1100 | 12 | 35 | 35 |
17-40 | 590 | 800-950 | 14 | 40 | 40 |
41-100 | 460 | 700-850 | 15 | 45 | 40 |
Distance From Quenched End in mm
- | 1.5 | 3 | 5 | 7 | 9 | 11 | 13 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 |
H max. | 57 | 57 | 56 | 54 | 52 | 49 | 46 | 44 | 39 | 37 | 35 | 34 | 33 | 32 | 31 |
H min. | 49 | 48 | 45 | 41 | 35 | 32 | 29 | 27 | 23 | 21 | 20 | - | - | - | - |
HH max. | 57 | 57 | 56 | 54 | 52 | 49 | 46 | 44 | 39 | 37 | 35 | 34 | 33 | 32 | 31 |
HH min. | 52 | 51 | 49 | 45 | 41 | 38 | 35 | 33 | 28 | 26 | 25 | 24 | 23 | 22 | 21 |
HL max. | 54 | 54 | 52 | 50 | 46 | 43 | 40 | 38 | 34 | 32 | 30 | 29 | 28 | 27 | 26 |
HL min. | 49 | 48 | 45 | 41 | 35 | 32 | 29 | 27 | 23 | 21 | 20 | - | - | - | - |
Forging
Hot forming temperature: 1050-850oC.