AISI 1010 ، 1.0301 ، DIN Ck10 ،
- درجه:
کلیک کنید برای ارسال ایمیل
به اشتراک گذاری این آگهی
مشخصات، شیمیایی و عملکرد مکانیکی
ما می توانیم تولید کنیم 1.1121, DIN Ck10, AISI 1010 stainless steel round rods, 1.1121, DIN Ck10, AISI 1010 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With Bozhong production experience, strict control 1.1121, DIN Ck10, AISI 1010 chemical composition and 1.1121, DIN Ck10, AISI 1010 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.
مشخصات محصول
Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
عرض: 10mm تا 2500mm
Lenth: ما می توانیم هر لنج را براساس نیاز مشتری تهیه کنیم.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
ما به شما با صداقت احترام و حرفه ای بودنمان خدمات میدهیم.
تعیین بر اساس استاندارد
| نام تجاری | LH No. | حصیر نه | DIN | EN | AISI |
| CK10 | 605 | 1.0301 | C10 | C10 | 1010 |
ترکیب شیمیایی (در وزن٪)
| C | Si | Mn | Cr | Mo | Ni | V | W | دیگران |
| 0.10 | حداکثر 0.40 | 0.45 | - | - | - | - | - | - |
شرح
CK10 is a plain carbon steel with a nominal 0.10% carbon content. It is a relatively low strength steel but it may be quenched and tempered for increased strength.
برنامه های کاربردی
The low carbon steels, such as CK10, are used for applications such as cold headed fasteners and bolts.
خصوصیات بدنی (مقادیر آواریژ) در دمای محیط
مدول الاستیسیته [103 x N / mm2]: 210
تراکم [g / cm3]: 7.85
آنیل نرم
گرما تا 800-840oC, cool slowly.
استحکام سیستم عامل ها
This steel is generally used in the annealed or case hardened condition. It may be heat treated, quenched and tempered but the cost for so doing is generally not worth the result.
خستگی
درجه حرارت دما: 320-530oC.
آهنگری
دمای تشکیل گرم: 1050-850oC.
ماشین کاری
Machinability of CK10 steel is fairly good, especially in the cold drawn or cold worked condition. Based upon carbon steel AISI 1112 as a reference that is considered 100% machinable (easily machined) the CK10 steel has a rating of 55%.
مقاومت در برابر خوردگی
This is a plain carbon steel and has no corrosion resistance. It will rust unless protected.
جوش
CK10 steel may be welded by all of the standard welding techniques.
کار سرد
CK10 is easily cold worked by traditional means. Following severe cold working a stress relief, or full, anneal should be performed.
ویژگی های مکانیکی
عملیات حرارتی
