Inglese
français
español
Portoghese
русский
한국 의
हिंदी
العربية
فارسی
Việt Nam
Italiano
logo
Abbreviazione stock: Bozhong Group
Codice di riserva: 210988
Orari di apertura
Lun - Sab 8.00 - 18.00
Chiama
+ 86-185 1669 6028
Mandaci una email
[Email protected]
bandiera
  • Barra rotonda C45 | AISI 1045 | DIN 1.1191 | JIS S45C
  • Barra rotonda C45 | AISI 1045 | DIN 1.1191 | JIS S45C

Barra rotonda C45 | AISI 1045 | DIN 1.1191 | JIS S45C

  • grado:
Interessato a questo annuncio? Contattare il venditore!
TouxJanet Chang

+ 86-185 1669 6028

Rispondi a Venditore

Condividi questo annuncio

Pinterest Email LinkedIn Google+ Facebook Twitter AddThis

Specifiche, Chemical & prestazioni meccaniche

Steel C45 Round Bar is an unalloyed medium carbon steel, which is also a general carbon engineering steel. C45 is a medium strength steel with good machinability and excellent tensile properties. C45 round steel is generally supplied in the black hot rolled or occasionally in the normalised condition, with a typical tensile strength range 570 – 700 Mpa and Brinell hardness range 170 – 210 in either condition. It does not however respond satisfactorily to nitriding due to a lack of suitable alloying elements.

C45 round bar steel is equivalent to EN8 or 080M40. Steel C45 bar or plate is suitable for the manufacture of parts such as gears, bolts, general-purpose axles and shafts, keys and studs.

1. Supply Range of Steel C45 Round Bar

  • C45 Steel Round Bar: diameter 8mm – 3000mm
  • C45 Steel Plate: thickness 10mm – 1500mm x width 200mm – 3000mm
  • C45 Steel Flat Bar: 200mm – 1000mm
  • Square C45 Steel: 20mm-800mm
  • Hexagon Steel.

Finitura superficiale: Black, Rough Machined, Turned or as per given requirements.

2. Common C45 Steel Specifications

Nazione USA britannico Giappone Australia
Standard ASTM A29 EN-10083 2 JIS G4051 AS 1442
classi 1045 C45/1.1191
S45C 1045

3. C45 Round Bar Steel Chemical Composition Properties

Standard grado C Mn P S Si Ni Cr
ASTM A29 1045 0.43-0.50
0.60-0.90 0.04 0.050 - - -
EN-10083 2 C45/1.1191 0.42-0.50 0.50-0.90
0.03 0.035 0.04 0.4 0.4
JIS G4051 S45C 0.42-0.48 0.60-0.90 0.03 0.035 0.15-0.35 - -

4. Mechanical Properties of C45 Round Bar Steel Material

  • Mechanical Properties in Quenched+Tempered Condition
Diameter d (mm) Thickness t (mm) 0.2% stress proof (N / mm2) Resistenza alla trazione (N / mm2) Allungamento A5 (%) Riduzione Z (%)
min. 490 700-850 min. 14 min. 35
<17-40 <8<=20 min. 430 650-800 min. 16 min. 40
<41-100 <20<=60 min. 370 630-780 min. 17 min. 45
  • Mechanical Properties in Normalized Condition
Diameter d (mm) Thickness t (mm) 0.2% stress proof (N / mm2) Resistenza alla trazione (N / mm2) Allungamento A5(%)
min. 390 min. 620 min. 14
<17-100 <16<=100 min. 305 min. 305 min. 16
<101-250 <100 <250 min. 275 min. 560 min. 16

5. Forging of Carbon Steel C45 Round Bar

Hot forming temperature: 850-1200oC.

Pre heat to 750 oC – 800 oC, then continue heating to 1100 oC – 1200 oC maximum, hold until temperature is uniform throughout the section and commence forging immediately. Forging is not workable below 850 oC. Finished forgings could be air cooled.

We are strong on forged steel C45 round bar. Welcome enquiry of C45 steel materials.

Shape Available
Solid round bar
Flat bar
Square bar
Hexagon bar
Bloccare
Piastra
Foglio
Wire rod
Striscia

6. DIN C45 Round Bar Steel Grade Heat Treatment

Forging or hot rolling: 1100 - 850 ° C
Normalising: 840 – 880°C/air
Soft annealing: 680 – 710°C/furnace
Tempra: 820 – 860°C/water, oil
Tempering: 550 – 660°C/air

7. Hardening of DIN C45 Steel Hardening

Harden from a temperature of 820-860oC followed by water or oil quenching.

Heat to 820 oC – 850 oC hold until temperature is uniform throughout the section, soak for 10 – 15 minutes per 25mm of section, and quench in water or brine. Or,

Heat to 830 oC – 860 oC soak as above and quench in oil.Temper immediately while still hand warm.

Surface hardness for C45 special steel round bar after flame or induction hardning:

  • Steel Name Steel number Surface Harndess
  • C45 1.1191 min. 55 HRC

8. Application of DIN Carbon Steel C45 Round Bar

DIN C45 round bar steel material and steel plate C45, flats are widely used in all industry for uses which require more strength and wear resistance than the low carbon mild steel.

Quenched and subsequently tempered steel for C45 steel grade round bar, steel plate, flat and square is used for axles, bolts, forged connecting rods, crankshafts, torsion bars, light gears, guide rods, screws, forgings, wheel tyres, shafts, sickles, axes, knives, wood working drills, hammers, etc.

Welcome customers to inquiry DIN C45 round bar, CK45/1.1191 steel plate, flat steel for C45 steel price. We are professional supplier and exporter for more than 20 years. We offer you worldwide solution for C45 round bar steel.

ritorno