| Formato |
ASTM |
| Haste e barra |
B 446 |
| Placa, folha e tira |
B 443, B 906 |
| Tubo sem costura e tubo |
B 444, B 829 |
| Tubo soldado |
B 705, B 775 |
| Tubo soldado |
B 704, B 751 |
| Conexão de soldagem |
B 366 |
| Tarugo e barra para reforma |
B 472 |
| Forjar |
B 564 |
Composição química
| % |
Ni |
Cr |
Mo |
Fe |
C |
Mn |
Si |
P |
S |
Co |
Nb + Ta |
Al |
Ti |
| minutos |
58.0 |
20.0 |
8.0 |
|
|
|
|
|
|
|
3.15 |
|
|
| max |
|
23.0 |
10.0 |
5.0 |
0.10 |
0.50 |
0.50 |
0.015 |
0.015 |
1.00 |
4.15 |
0.40 |
0.40 |
Propriedades físicas
| Densidade |
8.44 g / cm3 |
| Intervalo de fusão |
1290 1350-℃ |
Características: Inconel 625 has excellent strength at temperatures up to 816℃. At higher temperatures, its strength is generally lower than that of other solid solution strengthened alloys. Inconel 625 has good oxidation resistance at temperatures up to 980℃ and shows good resistance to aqueous corrosion, but is relatively moderate compared to other more capable corrosion resistant alloys.
Aplicações: Chemical process industry and sea water application. Inconel 625 is used in short term applications at temperatures up to 816℃. For long term service, it is best restricted to a maximum of 593℃, because long term exposure above 593℃ will result in significant embrittlement.
|
|
