ASTM Высокоскоростная инструментальная сталь T6 (UNS T12006)
- Оценка:
Заинтересованы в этом объявлении? Связаться с продавцом!
Джанет Чанг + 86-185 1669 6028
Click To Email Продавец
Рассказать об этом объявлении
Спецификация, Химическая и механические характеристики
ASTM T6 High Speed tool steel also belongs to tungsten type high speed steels in ASTM A600 specification. ASTM T6 Tool Steel is similar to T5 Tool Steel, but T-6 steel has more Cobalt and Tungsten content than T5 tool steels, and T6 tool steel is better in high temperature hardness and wear resistance.
We are one of best supplier of AISI T6 tool steel. We supply exactly what you need about ASTM T6 HSS tool steel.
1.AISI T6 Tool Steel Supply Range
T6 Steel Round Bar: diameter 2mm – 800mm
T6 Steels Flat: thickness 2-400mm x width 10-600mm
T6 Tool Steel Plate: thickness 2-600mm x width 200-610mm
Поверхностная обработка: черная, с грубой обработкой, точеная или в соответствии с заданными требованиями.
2.Standard of AISI T6 Tool Steel High Speed
| Страна | США |
| Стандарт | ASTM A600 |
| Оценки | T6 / T12006 |
3.ASTM High Speed T6 Steel Chemical Composition Properties
| ASTM A600 | C | Mn | P | S | Si | Cr | V | Mo | W | Co | ||||||||
| T6 / T12006 | 0.75 | 0.85 | 0.20 | 0.40 | 0.03 | 0.03 | 0.20 | 0.40 | 4.00 | 4.75 | 1.50 | 2.10 | 0.40 | 1.00 | 18.50 | 21.00 | 11.00 | 13.00 |
4.AISI T6 Tool Steels Mechanical Properties
T6 Tool Steel Physical Properties
- Плотность (фунт / куб. Дюйм.) 0.322
- Удельный вес 8.89
- Температура плавления (градус F) 2620
- Модуль упругости Напряжение 29
Mechanical Properties of T-6 Tool Steel
|
Прочность на разрыв Rp0.2 |
Предел прочности Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
| 633 (≥) | 366 (≥) | 43 | 23 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 134 |
5.Forging of ASTM T6 High Speed Steel
Forge at 1162℃ down to 1010℃. Do not forge below 982℃.
6.ASTM T6 High Speed Steel Heat Treatment
Preheat TT steels to 815℃ and then heat rapidly to 1273 – 1287℃ and hold at temperature for 2 to 5 minutes. Quench in air, salt bath, or oil.
Annealing of Steel T-6
Anneal at 885℃ and slow cool in the furnace at a rate less than 4℃ per hour.
Tempering of T6 Steel
Temper T6 at 537℃ to 593℃ for Rockwell C of 65 to 60.
7.Applications of AISI T6 High Speed Steel
AISI T6 high speed steels are mainly used for cutting applications such as drills, milling processes, cutting tools, reamers, etc.
Some typical applications of T6 tool steel are as below:
- Turning and slotting tools
- Broaching tools
- Развертки
- Threading dies
- Twist drills
- Ленты
- Broaches etc
Together with ASTM T6 tool steel, we could also supply you T-1 steels, T2 steel, T4 tool steel, T5 steels, T15 steel, M2 & M42steel etc. You are welcome to send your requests to us anytime. We are a better choice for you.
