Tiếng Anh
français
español
Bồ Đào Nha
русский
Hàn Quốc
हिंदी
Ả rập
فارسی
Việt Nam
italiano
Logo
Viết tắt chứng khoán: Tập đoàn Bozhong
Mã chứng khoán: 210988
Giờ mở cửa
Mon - Sat 8.00 - 18.00
gọi cho chúng tôi
+ 86-185 1669 6028
Gửi email cho chúng tôi
[Email protected]
cờ
  • AISI M7 / 1.3348 / DIN S2-9-2
  • AISI M7 / 1.3348 / DIN S2-9-2

AISI M7 / 1.3348 / DIN S2-9-2

  • Lớp:
Quan tâm đến quảng cáo này? Liên hệ với người bán!
touxJanet Chang

+ 86-185 1669 6028

Nhấn Đến email của người bán

Chia sẻ quảng cáo này

Pinterest E-mail LinkedIn Google+ Facebook TWITTER Thêm điều này

Đặc điểm kỹ thuật, hóa chất & Cơ Performance

Chỉ định theo tiêu chuẩn

Hàng hiệu Số Chiếu. Không. DIN EN AISI
BR885 885 1.3348 S2-9-2 Sàn giao dịch trực tuyến -NUMX-2-9 M7

Thành phần hóa học (tính theo% trọng lượng)

C Si Mn Cr Mo Ni V W Loại khác
0.98 tối đa XUẤT KHẨU tối đa XUẤT KHẨU 4.00 8.70 - 1.95 1.80 -

Mô tả
M7 is one of the High Speed Tool Steels in the molybdenum alloy family, with tungsten, chromium and vanadium for strengthening. It has good hardenability and is very wear resistant. Very high resistance to softening at elevated temperatures and good toughness. Deep hardening response.

Các ứng dụng
M7 is widely used for cutting tools in machining operations. Sendzimir rolls, segment and circular cutters, profile cutting tools, thread cutting drills and cold forming tools.

Tính chất vật lý (giá trị avarage) ở nhiệt độ môi trường
Mô đun đàn hồi [103 x N / mm2]: XUẤT KHẨU
Mật độ [g / cm3]: XUẤT KHẨU
Thermal conductivity [W/m.K]: 19.0
Electric resistivity [Ohm mm2/m]: 0.65
Specific heat capacity[J/g.K]: 0.46

Coefficient of Linear Thermal Expansion 10-6oC-1

20-100oC 20-200oC 20-300oC 20-400oC 20-500oC 20-600oC 20-700oC
11.7 12.5 12.9 13.2 13.4 13.4 13.4

Continuous Cooling Transformation (CCT) Diagram


Click the image to enlarge the diagram.

Time-Temperature Transformation (TTT) Diagram


Click the image to enlarge the diagram.

Ủ mềm
Đun nóng đến 820-880oC, cool slowly in furnace. This will produce a maximum Brinell hardness of 230-280.

Làm cứng
Heat up to 450-600oC, preheat to 850oC and then to 1050oC. Harden from a temperature of 1180-1220oC followed by oil, air quenching or warm bath at 550oC. Hardness after quenching is 64-66 HRC.

Tempering
Tempering temperature: 3 x 1 hour at 540-560oC. Hardness after tempering is min 64 HRC.

Giả mạo
Nhiệt độ hình thành nóng: 1100-900oC.

Cold Working: In the annealed condition M7 may be cold worked by conventional methods.

Machinability
Machinability is medium, rating about 60% that of the W group water hardening low alloy tool steels at 100% for comparison.

Chống ăn mòn
Although this alloy contains chromium and molybdenum it is still a steel and thus will corrode. It should be protected from rusting.

Hàn
This is a complex alloy but is weldable. Consult the supplier for procedures and details.

Forms manufactured: Please see the Dimensional Sales Program.

Disclaimer
The information and data presented herein are typical or average values and are not a guarantee of maximum or minimum values. Applications specifically suggested for material described herein are made solely for the purpose of illustration to enable the reader to make his own evaluation and are not intended as warranties, either express or implied, of fitness for these or other puposes. There is no representation that the recipient of this literature will receive updated editions as the become available.

trở lại