ASTM High Speed T6 Tool Steel (UNS T12006)
- Lớp:
Nhấn Đến email của người bán
Chia sẻ quảng cáo này
Đặc điểm kỹ thuật, hóa chất & Cơ Performance
ASTM T6 High Speed tool steel also belongs to tungsten type high speed steels in ASTM A600 specification. ASTM T6 Tool Steel is similar to T5 Tool Steel, but T-6 steel has more Cobalt and Tungsten content than T5 tool steels, and T6 tool steel is better in high temperature hardness and wear resistance.
We are one of best supplier of AISI T6 tool steel. We supply exactly what you need about ASTM T6 HSS tool steel.
1.AISI T6 Tool Steel Supply Range
Thanh tròn thép T6: đường kính 2mm - 800mm
Thép T6 phẳng: độ dày 2-400mm x chiều rộng 10-600mm
T6 Tool Steel Plate: thickness 2-600mm x width 200-610mm
Bề mặt hoàn thiện: Đen, Gia công thô, Quay hoặc theo yêu cầu nhất định.
2.Standard of AISI T6 Tool Steel High Speed
| Quốc gia | Hoa Kỳ |
| Tiêu chuẩn | ASTM A600 |
| các lớp | T6 / T12006 |
3.ASTM High Speed T6 Steel Chemical Composition Properties
| ASTM A600 | C | Mn | P | S | Si | Cr | V | Mo | W | Co | ||||||||
| T6 / T12006 | 0.75 | 0.85 | 0.20 | 0.40 | 0.03 | 0.03 | 0.20 | 0.40 | 4.00 | 4.75 | 1.50 | 2.10 | 0.40 | 1.00 | 18.50 | 21.00 | 11.00 | 13.00 |
4.AISI T6 Tool Steels Mechanical Properties
T6 Tool Steel Physical Properties
- Mật độ (lb / cu. In.) 0.322
- Lực hấp dẫn cụ thể 8.89
- Điểm nóng chảy (Độ F) 2620
- Mô-đun đàn hồi căng thẳng 29
Mechanical Properties of T-6 Tool Steel
|
Sức mạnh bằng chứng Rp0.2 |
Sức căng Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
| 633 (≥) | 366 (≥) | 43 | 23 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 134 |
5.Forging of ASTM T6 High Speed Steel
Forge at 1162℃ down to 1010℃. Do not forge below 982℃.
6.ASTM T6 High Speed Steel Heat Treatment
Preheat TT steels to 815℃ and then heat rapidly to 1273 – 1287℃ and hold at temperature for 2 to 5 minutes. Quench in air, salt bath, or oil.
Annealing of Steel T-6
Anneal at 885℃ and slow cool in the furnace at a rate less than 4℃ per hour.
Tempering of T6 Steel
Temper T6 at 537℃ to 593℃ for Rockwell C of 65 to 60.
7.Applications of AISI T6 High Speed Steel
AISI T6 high speed steels are mainly used for cutting applications such as drills, milling processes, cutting tools, reamers, etc.
Some typical applications of T6 tool steel are as below:
- Turning and slotting tools
- Broaching tools
- Reamers
- Threading dies
- Twist drills
- băng
- Broaches etc
Together with ASTM T6 tool steel, we could also supply you T-1 steels, T2 steel, T4 tool steel, T5 steels, T15 steel, M2 & M42steel etc. You are welcome to send your requests to us anytime. We are a better choice for you.
