S275JR / 1.0044 thép
- Lớp:
Nhấn Đến email của người bán
Chia sẻ quảng cáo này
Đặc điểm kỹ thuật, hóa chất & Cơ Performance
Tiêu chuẩn: EN10025-2
Steel grade : S275JR, S275J0, S275J2, S235JR, S235J0, S235J2
Classification : Non-alloy structural steel
Application : Non-alloy steel for structural purposes
This are common mild steel/carbon steel plate for structural, manufacturing plant, machinery, mining equipment , excavators, loader, bulldozers, crane, mining hydraulic supports, construction, power plant, sugar mill, palm oil mill, oil and gas, port equipments, fans, drilling rigs, power shovel and other structural parts. Heat analysis shall be used to determine the required chemical composition for carbon. Manganese, phosphorus, sulfur, silicon, and copper. Tensile strength, yield strength, and elongation shall be evaluated using tension test.
S275JR and its related series (S275J0, S275J2, S235JR, S235J0, S235J2) are very versatile common mild steel/carbon steel plate for multiple structural applications e.g. manufacturing plant, machinery, mining equipment and vehicles, excavators, loader, bulldozers, crane, mining hydraulic supports, construction, power plant, sugar mill, palm oil mill, oil and gas, port equipments, fans, drilling rigs, power shovel and other structural parts. Heat analysis shall be used to determine the required chemical composition for carbon. Manganese, phosphorus, sulfur, silicon, and copper. Tensile strength, yield strength, and elongation shall be evaluated using tension test.
S symbol for structural steel
275 indication of the min specified yield strength for thickness of under16mm.
JR symbol 20 temperature impact test.
Kiểm tra tác động nhiệt độ biểu tượng J0 0
Biểu tượng J2 -20 thử nghiệm tác động nhiệt độ
S275JR Chemical is max composition of product analysis:
|
Nominal thickness = < 40(mm) C max = 0.21 Nominal thickness = < 40 (mm) CEV max = 0.40 |
||||||
|
C |
Mn |
P |
S |
N |
Cu |
CEV |
|
tối đa 0.22 |
tối đa 1.5 |
tối đa 0.04 |
tối đa 0.04 |
tối đa 0.012 |
tối đa 0.55 |
tối đa 0.42 |
S275JR mechanical properties steel.
|
Nominal thickness (mm) |
để 16 |
16-40 |
40-63 |
63-80 |
80-100 |
100-125 |
|
ReH - Minimum yield strength (MPa) |
275 |
265 |
255 |
245 |
235 |
225 |
|
Nominal thickness (mm) |
3 - 100 |
100 - 125 |
|
Rm - Tensile strength (MPa) |
410 - 560 |
400 - 540 |
|
Nominal thickness (mm) |
3 - 40 |
40 - 63 |
63 - 100 |
100 - 125 |
|
A - Minimum elongation Lo = 5,65√ So (%) |
23 |
22 |
21 |
19 |
|
Nhiệt độ |
-20 |
0 |
20 |
|
Notch impact test. Min. absorbed energy |
27 |
27 |
27 |
Năng lượng tác động tối thiểu là năng lượng dọc
S275JR, S275J0 and S275J2 EN10025-2 standard min thickness 5mm up to max thickness 390mm.
We can exclusively produce steel plate thickness 5mm X width 2000mm X your choice of length.
